Metal Roof Installation in Vancouver, WA & Portland, OR
A metal roof can be the last roof you ever buy — 50-plus years of protection, fire resistance, and clean curb appeal. But only when it’s installed as a complete system. That’s the only way we do it.
Get a Free Estimate
Metal Roofing Done Right
More Pacific Northwest homeowners are choosing metal — for its lifespan, its fire resistance, and the way it sheds our relentless rain. At Jobin Roofing, we install standing-seam, snap-lock, corrugated, and metal shake roofing systems built for Southwest Washington and Greater Portland weather.
The difference between a metal roof that lasts 50 years and one that fails in 15 isn’t the panels — it’s everything underneath them. We build the whole system correctly, or we don’t do it at all.
Looking for a more traditional roof profile? Explore our metal shake roofing options →
Get a Free Estimate
Why Choose a Metal Roof
In a climate this wet, the right roof pays you back for decades. Here’s what draws homeowners to metal:
Outlasts Everything
A properly installed standing-seam roof lasts 45–60 years — roughly twice the life of asphalt here.
Sheds Rain, Resists Moss
Smooth, interlocking panels give the moss that eats asphalt roofs nothing to grab.
Class A Fire Protection
Non-combustible by nature — and increasingly important as insurers scrutinize roofing.
Curb Appeal & Resale
Reads as a premium, permanent upgrade that buyers notice.
Energy & Sustainability
Reflective finishes cut summer heat gain, and most metal roofing is recyclable.
A Metal Roof Is Only as Good as the System Beneath It
The panels are the easy part. Slap metal over a roof without solving the conditions that make metal work, and the homeowner is left exposed to problems that don’t surface for years:
- Condensation on the underside of the panels
- Premature vapor-barrier degradation
- Swelling and delaminated plywood decking
- Organic growth and trapped moisture
- Oil canning — visible waves across the panels
Sized to the 1:150 Rule
Without balanced airflow, warm interior air condenses on the cold underside of the metal — rotting decking and feeding mold. We assess intake and exhaust and correct any shortfall to the 1:150 standard before the roof goes on.
Assessed for Evenness First
Metal telegraphs an uneven deck — that’s oil canning. On many older homes we recommend 24-gauge over 26, because the heavier metal masks the imperfections thinner panels reveal. It’s a call the lowest bidder won’t make.
Vapor Control That Lasts
The right high-temperature underlayment and a sound vapor strategy protect the deck for the life of the roof. On metal, the wrong choice here is the difference between a 50-year system and an expensive liability.
Metal Roofing Options We Install
Metal isn’t one product. We install several profiles and help you choose the right one for your roof’s slope, your home’s age, your style, and your budget.
Standing Seam — Snap-Lock
Clean, concealed-fastener panels with no exposed screws to back out or leak. The sleek, modern look most homeowners picture, ideal for pitched roofs and built to last 45–60 years.
Standing Seam — Mechanically Seamed
For lower-sloped roofs where weather-tightness is critical, we mechanically seam the panels for a locked, watertight finish. Also concealed-fastener, also decades of service.
Metal Shake Roofing
Want the character and dimensional appearance of cedar without using natural wood as the exposed roof surface? Metal shake roofing combines a traditional shake-inspired profile with the durability of a metal roofing system.
Explore Metal Shake Roofing →Corrugated / PBR Panels
Exposed-fastener panels over wood or metal purlins, typically with a foil-faced insulation blanket to deflect heat. The cost-effective choice for shops, barns, and outbuildings.
We install metal roofing in both 24- and 26-gauge where appropriate, from Metallion Industries — built right here in Estacada, Oregon — ASC Building Products, and Taylor Metal.
Get a Free Estimate
Why Homeowners Trust Jobin
A metal roof is a serious investment, and choosing who installs it is nerve-wracking when every contractor sounds the same on the phone. We get it — and we’ve earned the trust that comes with getting it right. Jobin Roofing has served over 3,300 homeowners across Southwest Washington and the Greater Portland area, including home inspectors and manufacturers who chose us for their own homes.
- Direct access to the owners, Brendan and Casey, on every project.
- Licensed, bonded & insured — WA #JOBINRL824MZ · OR CCB #221810.
- A Pacific Northwest crew who know moss, rain, shade, and ventilation firsthand.
- Honest to a fault — we credit back materials we estimated but didn’t use.
Getting Started Is Easier Than You Think
Schedule Your Free Estimate
One call or form — no pressure, no obligation.
Get a Thorough Assessment
We evaluate the whole system: ventilation, decking, and the right metal solution for your home.
Build a Solution That Fits
A clear plan and honest recommendation matched to your home and budget. Financing available.
Communities We Serve
We proudly serve all of Southwest Washington and the Greater Portland area with the quality, transparent, and honest roofing our community deserves. Some of the areas we serve:
- Salmon Creek
- Vancouver
- Brush Prairie
- Ridgefield
- Battle Ground
- Orchards
- Camas
- Washougal
- Hillsboro
- Beaverton
- Tualatin
- Milwaukie
- Portland
Common Questions About Metal Roofing
Protection and Peace of Mind
Protect your largest asset with a metal roof built as a complete system. Start with a free, no-pressure assessment.
Get a Free EstimateWashington (360) 952-3998 · Oregon (503) 523-3449